Innova CanOBD2&1 Owner's Manual page 57

When recorded Live Data is
played back, all available PIDs are
shown, even if you have custom-
ized the Live Data selections.
If there is no Live Data currently
stored in the CanOBD2&1 Scan
Tool's
message shows on the display.
Press the DTC SCROLL
Playback" mode.
4. When you have viewed all PID information for the current frame of
Live Data, use the DOWN
list. Highlight Next Frame or Previous Frame, as desired, then press
the ENTER/LD
5. When you have finished viewing the recorded Live Data, exit the
"Live Data Playback" mode using the appropriate procedure shown
below:
If the Enhanced CanOBD2&1 Scan Tool is connected to a
vehicle, use the DOWN
list, highlight Exit Playback, then press the ENTER/LD
button.
If the CanOBD2&1 Scan Tool is not connected to a vehicle,
press the DTC SCROLL
CanOBD2&1
OBD2 Live Data Mode
memory, an advisory
button to scroll to the end of the PID
button.
button to scroll to the end of the PID
LIVE DATA PLAYBACK
button to exit the "Live Data
button.
55