Innova CanOBD2&1 Owner's Manual page 34

OBD2 Systems
VIEWING ENHANCED DTCs
A visible
being powered through the vehicle's DLC connector.
A visible
linked to (communicating with) the vehicle's computer.
The upper right hand corner of the
display shows the number of the
code currently being displayed, the
total number of codes retrieved.
The Diagnostic Trouble Code (DTC)
and related code definition are
shown in the lower section of the
LCD display.
The CanOBD2&1 Scan Tool will
display a code only if codes are
present in the vehicle's computer
memory. If no codes are present, a
"No Enhanced DTC's are presently
stored in the vehicle's computer" is
displayed. Press the ENTER/LD
button to return to the Chrysler
Enhanced menu.
3. If more than one code was retrieved press the DTC SCROLL
button, as necessary, to display additional codes one at a time.
Whenever the Scroll function is used to view additional codes,
the CanOBD2&1 Scan Tool's communication link with the
vehicle's computer disconnects. To re-establish communication,
press the LINK
4. When the last retrieved DTC has been displayed and the DTC
SCROLL
to the Chrysler Enhanced menu.
To view additional enhanced DTCs, repeat steps 1 through 4,
above.
To exit the enhanced mode, use the UP
buttons, as necessary, to select Exit from the Chrysler
Enhanced menu, then press the ENTER/LD
CanOBD2&1 Scan Tool returns to the OBD2 DTC screen.
32
icon indicates that the CanOBD2&1 Scan Tool is
icon indicates that the CanOBD2&1 Scan Tool is
I/M MONITOR STATUS icons are not displayed when
viewing enhanced DTCs.
In the case of long code definitions, or when viewing
Freeze Frame data, a small arrow is shown in the
upper/lower right-hand corner of the code display area
to indicate the presence of additional information. Use
the and buttons, as necessary, to view the
additional information.
button again.
button is pressed, the CanOBD2&1 Scan Tool returns
and DOWN
button. The
CanOBD2&1