Innova CanOBD2&1 Owner's Manual page 102

GM OBD1 Systems
CODE RETRIEVAL PROCEDURE
3. Select the model year of the vehicle from which you wish to retrieve
codes:
If a previous vehicle selection is currently saved in the
CanOBD2&1
Selection/Select New Vehicle" menu displays. If no previous
vehicle selection is stored in the CanOBD2&1 Scan Tool's
memory, "Select Vehicle Year" menu displays.
Use the
selections.
To retrieve DTCs from the vehicle selection currently in the
CanOBD2&1 Scan Tool's memory:
- From
Select
highlight Current Selection, turn
ignition key ON (DO NOT start
engine) and press the ENTER/LD
- Proceed to step 5 to continue.
To retrieve DTCs from a new
vehicle:
- From
Select
highlight Select New Vehicle and
press the ENTER/LD
the "Select Vehicle Year" menu
displays.
- Highlight the desired year, then
press the ENTER/LD
the "Enter the 8th digit of VIN"
menu displays.
- Highlight the 8th digit of the
vehicle's VIN, then press the
ENTER/LD
If the "Enter 4th VIN Digit" screen displays (not applicable to all
vehicles), highlight the 4th digit of the vehicle's VIN, then press
the ENTER/LD
- The "Current Selection/Select New Vehicle" screen displays
for your confirmation.
- If the information shown in the "Current Selection" field is
correct, highlight Current Selection, turn ignition key ON (DO
NOT start engine) and press the ENTER/LD
Proceed to step 4 to continue.
100
Scan
and buttons, as necessary, to make menu
the "Current
New Vehicle"
button.
the "Current
New Vehicle"
button.
button.
Tool's memory,
Selection/
screen,
Selection/
screen,
button;
button;
the "Current
button.
CanOBD2&1