Innova CanOBD2&1 Owner's Manual page 29

9. Read and interpret Diagnostic Trouble Codes/system condition
using the display and the green, yellow and red LEDs.
The green, yellow and red LEDs are used (with the LCD
display) as visual aids to make it easier to determine
engine system conditions.
Green LED – Indicates that all
engine
operating normally. All Monitors
supported by the vehicle have run
and
testing, and no trouble codes are
present. A zero will show on the
CanOBD2&1 Scan Tool's display,
and all Monitor icons will be solid.
Yellow LED – Indicates one of the following conditions:
A. A PENDING CODE IS PRESENT –
If the yellow LED is illuminated, it
may indicate a Pending code is
present. Check the CanOBD2&1
Scan Tool's display for confirmation.
A Pending code is confirmed by the
presence of a numeric code and the
word PENDING on the CanOBD2&1
Scan Tool's display.
B. MONITOR NOT RUN STATUS – If
the
display shows a zero (indicating
there are no DTC's present in the
vehicle's computer memory), but the
yellow LED is illuminated, it may be
an indication that some of the
Monitors supported by the vehicle
have not yet run and completed
their diagnostic testing. Check the
CanOBD2&1 Scan Tool's display for confirmation. All Monitor
icons that are blinking have not yet run and completed their
diagnostic testing; all Monitor icons that are solid have run and
completed their diagnostic testing.
CanOBD2&1
In the case of long code definitions, or when viewing
Freeze Frame data, a small arrow is shown in the
upper/lower right-hand corner of the code display area
to indicate the presence of additional information. Use
the and
additional information.
If a definition for the currently displayed code is not
available, an advisory message shows on the
CanOBD2&1 Scan Tool's display.
systems are
performed their
CanOBD2&1 Scan
OBD2 Systems
CODE RETRIEVAL PROCEDURE
buttons, as necessary, to view the
"OK" and
diagnostic
Tool's
27