Innova CanOBD2&1 Owner's Manual page 68

Additional OBD2 Tests
VEHICLE ID
If the Vehicle ID function is not
supported by the vehicle under
test, an advisory message shows
on the CanOBD2&1 Scan Tool's
display. Press the ENTER/LD
button to return to the Mode
Selection menu.
2. Use the UP
as necessary, to highlight Vehicle ID,
then press the ENTER/LD
3. A "One moment please..." message
displays while the requested information
is retrieved from the vehicle's computer.
The first time the Vehicle ID function is used, it may take
several minutes to retrieve the information from the vehicle's
computer.
4. When the retrieval process is completed,
the vehicle ID information is shown on
the CanOBD2&1 Scan Tool's display.
Use the UP
as necessary, to view the entire list.
5. When you have finished viewing the
retrieved vehicle ID information, press
the ENTER/LD
"Live Data" mode.
Viewing Available Modules
The CanOBD2&1 Scan Tool can retrieve a list of modules supported by
the vehicle under test.
1. From the "Mode Selection Menu", use
the UP
necessary, to highlight Vehicle ID, then
press the ENTER/LD
The "Vehicle Information Menu" dis-
plays.
If the Vehicle ID function is not
supported by the vehicle under
test, an advisory message shows
on the CanOBD2&1 Scan Tool's
display. Press the ENTER/LD
button to return to "Live Data"
mode.
66
and DOWN
and DOWN
button to return to
and DOWN buttons, as
button.
buttons,
button.
buttons,
CanOBD2&1