Obd2 Live Data Mode; Viewing Live Data - Innova CanOBD2&1 Owner's Manual

VIEWING LIVE DATA

1. Follow steps 1 through 7 of the CODE RETRIEVAL PROCEDURE
(page 24) to place the CanOBD2&1 Scan Tool in "Code Retrieval"
mode.
2. Press and release the ENTER/LD
button to place the CanOBD2&1 Scan
Tool in "Live Data" mode.
3. Real-time Live Data (PID) information
supported by the vehicle under test
displays.
Remember, what you are viewing is "real-time" Live Data. The
values (volts, rpm, temperature, vehicle speed, system status
etc) for the various PIDS displayed may change as the
vehicle's operating conditions change.
4. A vehicle usually supports several PIDs, however, only a limited
amount of PID data can be displayed on the screen at one time. If
additional PID data is available, a small arrow will be shown on the
display. Use the UP
scroll up or down to view all available PID data.
If communication with the vehicle is lost
while viewing Live Data, a Communica-
tion Lost" message shows on the
CanOBD2&1 Scan Tool's display.
5. If you experience vehicle problems, view
and/or compare the Live Data (PID)
information displayed on the CanOBD2&1
Scan Tool to specifications in the vehicle's
repair manual.
If desired, you can "customize" the Live Data display to show
only those PIDs you are interested in viewing. See
Customizing Live Data (PIDs) below for details. You may
also choose to "capture" (record) Live Data for later viewing.
See RECORDING (CAPTURING) LIVE DATA on page 49 for
details.
6. You can toggle back and forth between the DTC screen (to view
DTCs) and Live Data screen (to view PIDs) by alternately pressing
and releasing the DTC SCROLL
buttons once (the unit will stay linked to the vehicle while toggling
between modes). If the DTC SCROLL
then the screen will scroll to the next DTC and the CanOBD2&1
Scan Tool will be taken out of link.
When toggling from the Live Data to the DTC screen a "One
moment please..." message will temporarily display, followed
by the DTC screen.
CanOBD2&1

OBD2 Live Data Mode

and DOWN buttons, as necessary, to
and the ENTER/LD
VIEWING LIVE DATA
button is pressed twice,
47