Innova CanOBD2&1 Owner's Manual page 53

If Yes is selected, the CanOBD2&1 Scan Tool enters
"Playback" mode from which you can view a frame-by-frame
playback of recorded Live Data (see LIVE DATA PLAYBACK
on page 53 for details). If No is selected, the display returns to
the "Live Data View" mode.
9. You can exit the "Record Live Data Mode" at any time by pressing
and holding the ENTER/LD
Menu" displays.
If desired, you can transfer the recorded Live Data information
to a personal computer using the optional PC-LINK program
(see instructions included with PC-Link for more information).
Record by Manual Trigger
This option lets you select the precise time at which the Live Data
recording will occur. Record by Manual Trigger can be a very valuable
diagnostic tool when troubleshooting intermittent problems that do not
meet the requirements for a DTC to set. Even though a DTC is not
present, the intermittent problems will sometimes manifest themselves
briefly, for a few fractions of a second and/or only at certain vehicle
speeds or vehicle operating conditions.
1. With the CanOBD2&1 Scan Tool in
"Live Data" mode (see VIEWING LIVE
DATA on page 47 for details), press and
hold the ENTER/LD
"Mode Selection Menu" appears.
2. Use the UP
as necessary, to highlight Live Data
Menu, then press the ENTER/LD
button.
The "Live Data Menu" displays.
3. Use the UP
as necessary, to highlight Record Live
Data, then press the ENTER/LD
button.
The "Record Live Data Menu" dis-
plays.
4. Use the UP
as necessary, to highlight Record by
manual
ENTER/LD
5. When the "Record by Manual Trigger" screen displays, select the
desired trigger point as follows:
CanOBD2&1
button until the
and DOWN
and DOWN
and DOWN
trigger, then press
button.
OBD2 Live Data Mode
RECORDING (CAPTURING) LIVE DATA
button until the "Mode Selection
buttons,
buttons,
buttons,
the
51