Table of Contents
Advertisement
The Diagnostic Trouble Code (DTC)
and related code definition are
shown in the lower section of the
LCD display.
The Scan Tool will display a code only
if codes are present in the vehicle's
computer memory. If no codes are
present, a "No Enhanced DTC's are
presently stored in the vehicle's
computer" is displayed. Press the
ENTER/LD
Honda/Acura Enhanced menu.
3. If more than one code was retrieved press the DTC SCROLL
button, as necessary, to display additional codes one at a time.
Whenever the Scroll function is used to view additional codes,
the Scan Tool's communication link with the vehicle's computer
disconnects. To re-establish communication, press the LINK
button again.
4. When the last retrieved DTC has been displayed and the DTC
SCROLL
Honda/Acura Enhanced menu.
To view additional enhanced DTCs, repeat steps 1 through 4, above.
To exit the enhanced mode, use the UP
buttons, as necessary, to select Exit from the Honda/Acura
Enhanced menu, then press the ENTER/LD
Scan Tool returns to the OBD2 DTC screen.
Toyota/Lexus Enhanced DTCs
When Toyota/Lexus is selected from the
Enhanced
DTCs
Toyota/Lexus Enhanced menu displays.
Depending
on
communicate
Toyota/Lexus Enhanced menu provides
options to view:
CanOBD2&1
I/M
MONITOR
icons are not displayed
when viewing enhanced
DTCs.
In the case of long code definitions, or when viewing
Freeze Frame data, a small arrow is shown in the
upper/lower right-hand corner of the code display area
to indicate the presence of additional information. Use
the
and
buttons, as necessary, to view the
additional information.
button to return to the
button is pressed, the Scan Tool returns to the
Main
menu,
the
protocol
with
your
vehicle,
OBD2 Systems
VIEWING ENHANCED DTCs
STATUS
the
used
to
the
and DOWN
button. The
37
Advertisement
Table of Contents
