Innova CanOBD2&1 Owner's Manual page 40

OBD2 Systems
VIEWING ENHANCED DTCs
Current DTCs or History DTCs
Current DTCs, Historical DTCs or Readiness DTCs
1. Use the UP
as necessary, to highlight the desired
option, then press the ENTER/LD
button.
A "One moment please" message
displays,
retrieves the selected DTCs.
If the Scan Tool fails to link to the
vehicle's
Failed" message shows on the Scan
Tool's Display.
- Verify the ignition is ON, then
press the ENTER/LD
to continue.
2. To read the display:
Refer to DISPLAY FUNCTIONS on page 12 for a description
of LCD display elements.
A visible
through the vehicle's DLC connector.
A visible
(communicating with) the vehicle's computer.
The upper right hand corner of
the display shows the number of
the code currently being dis-
played, the total number of codes
retrieved.
The Diagnostic Trouble Code (DTC)
and related code definition are
shown in the lower section of the
LCD display.
38
and DOWN
while the Scan
computer, a
icon indicates that the Scan Tool is being powered
icon indicates that the Scan Tool is linked to
I/M MONITOR STATUS icons are not displayed when
viewing enhanced DTCs.
In the case of long code definitions, or when viewing
Freeze Frame data, a small arrow is shown in the
upper/lower right-hand corner of the code display area
to indicate the presence of additional information. Use
the and buttons, as necessary, to view the
additional information.
buttons,
Tool
"Linking
button
CanOBD2&1