Viewing Enhanced Data - Innova 3120 Owner's Manual

VIEWING ENHANCED DATA

Following the code retrieval procedure (see CODE RETRIEVAL
PROCEDURE on page 23), when the last retrieved DTC has been
displayed and the DTC SCROLL
the "enhanced" mode. The "enhanced" mode provides the ability to
retrieve enhanced DTCs from most Chrysler/Jeep, Ford/Mazda,
GM/Isuzu, Honda/Acura and Toyota/Lexus vehicles. The types of
enhanced data available depends on the vehicle make.
You can also view vehicle information, which includes the vehicle's VIN
number, calibration ID(s) and other related information, as well as a list
of available modules for the vehicle.
Vehicle information is available for model year 2000 and newer
OBD2-compliant vehicles only.
The screen shown when the Tool enters the "enhanced" mode depends
on the type(s) of DTC(s) returned during the code retrieval process:
If no DTCs were retrieved, or only generic
DTCs were retrieved, the Enhanced
Menu displays. Use the UP
DOWN
highlight the desired option, then press
the ENTER/FF
selected information, or, press the DTC
SCROLL
OBD2 DTC screen.
- When View Enhanced DTCs is
selected, the Select Manufacturer
screen displays. Use the UP
DOWN
highlight the appropriate manufac-
turer, then press the ENTER/FF
button to view enhanced DTCs.
If the manufacturer of the vehicle from which codes were
retrieved is not listed, highlight Exit and press the
ENTER/FF
screen. Enhanced DTCs are not available for your vehicle.
If a Manufacturer specific DTC was
retrieved, and the manufacturer selected
for the code was Chrysler, Jeep, Ford,
Mazda, General Motors, Isuzu, Honda,
Acura, Toyota or Lexus, the Select Data
menu displays. Use the UP
DOWN
highlight the desired option, then press
the ENTER/FF
the DTC SCROLL
OBD2 & 1
buttons, as necessary, to
button to view the
button to return to the
buttons, as necessary, to
button to return to the Enhanced Menu
buttons, as necessary, to
button to view the selected information, or, press
button to return to the OBD2 DTC screen.
OBD2 Systems
VIEWING ENHANCED DATA
button is pressed, the Tool enters
and
and
and
29