Table of Contents
Advertisement
About the CanOBD2&1 Scan Tool
ADJUSTMENTS/SETTINGS AND DTC LIBRARY
- The "Select Manufacturer" screen
displays.
- Use the UP
buttons,
highlight
manufacturer, then press the
ENTER/LD
the correct DTC for your vehicle.
If a definition for the DTC you
entered
advisory message shows on the
CanOBD2&1 Scan Tool's display.
4. If you wish to view definitions for
additional DTCs, press the ENTER/LD
button to return to the DTC Library
screen, and repeat steps 2 and 3.
5. When all desired DTCs have been viewed, press the ERASE
button to exit the DTC Library and return to the Setup Menu.
Selecting the Display Language
1. Use the UP
as
necessary,
Language in the Setup Menu, then
press the ENTER/LD
The Select Language screen dis-
plays.
The
Language is highlighted.
2. Press the UP
as necessary, to highlight the desired
display language.
3. When the desired display language is
highlighted, press the ENTER/LD
button to save your changes and return
to the Setup Menu (shown in the
selected display language).
Setting the Unit of Measurement
1. Use the UP
as necessary, to highlight Unit of
Measure in the Setup Menu, then
press the ENTER/LD
8
and DOWN
as
necessary,
the
button to display
is
not
available,
and DOWN
to
highlight
button.
currently
selected
or DOWN
and DOWN
button.
to
appropriate
an
buttons,
Select
display
button,
buttons,
CanOBD2&1
Advertisement
Table of Contents
