Innova CanOBD2&1 Owner's Manual page 35

Ford/Mazda Enhanced DTCs
Mazda Enhanced DTCs are available for Mazda-branded
Ford vehicles only.
When Ford/Mazda is selected from the Enhanced DTCs Main menu,
the Ford/Mazda Enhanced menu displays. You may view DTCs for
either the "Continuous Memory Test", "KOEO (Key On Engine Off) Test"
or "KOER (Key On Engine Running) Test."
1. Use the UP
necessary, to highlight the desired option,
then press the ENTER/LD
When choosing to view KOER
Test DTCs, start the vehicle's
engine before making your
selection.
A "One moment please" message displays, while the
CanOBD2&1 Scan Tool retrieves the selected DTCs.
If the CanOBD2&1 Scan Tool fails to
link to the vehicle's computer, a
"Linking Failed" message shows on
the CanOBD2&1 Scan Tool's Display.
- Verify the ignition is ON, then
press the ENTER/LD
to continue.
If the KOER Test was selected, and
the vehicle's engine is not running,
an advisory message shows on the
CanOBD2&1 Scan Tool's display.
- Start the vehicle's engine, then
press the ENTER/LD
to continue.
2. To read the display:
Refer to DISPLAY FUNCTIONS on page 12 for a
description of LCD display elements.
A visible
being powered through the vehicle's DLC connector.
A visible
linked to (communicating with) the vehicle's computer.
The upper right hand corner of the
display shows the number of the
code currently being displayed, the
total number of codes retrieved.
The Diagnostic Trouble Code (DTC)
and related code definition are shown in
the lower section of the LCD display.
CanOBD2&1
and DOWN buttons, as
button.
icon indicates that the CanOBD2&1 Scan Tool is
icon indicates that the CanOBD2&1 Scan Tool is
OBD2 Systems
VIEWING ENHANCED DTCs
button
button
33