VS Series Helium Mass Spectrometer Leak Detectors
3.1.12 System Defaults
Use this screen to restore system defaults.
Restore System Defaults:
This feature allows for resetting the system back to the original factory configurations:
❑
Resets Reject Setpoints
❑
Range Stop
❑
Top Range & original V-gain
❑
Auto Zero <0 - Inactive
❑
Internal calibrated leak information - default condition (re-input)
CPU Software Revision 3.10 (August 2010):
❑
Auto Zero<0 - Active
❑
Internal calibrated leak rate information will be retained
❑
V-gain value as shipped will be retained
Figure 3-24 System Defaults Screen
English for language for the display.
NOTE
3-29