Table of Contents
Advertisement
Accessories
2.
move it to the installation area before opening. (If there is a wooden crate,
open it by removing the bolts from the front of each (there are bolts on top as
well as on both sides.)) Remove the boxes from the accessory crate or pallet.
Electronics bay
3.
unit. The unpacking instructions provide information on removal from
the main 5DX pallet. The electronics bay is tethered to the main unit,
leave this tether in place even after installation.
Do not rely on the tether to move the electronics bay along with
Caution
the main unit. Someone must push or pull the electronics bay
while the main unit is being transported.
Verify Items Shipped
4.
unloading, system movement, and system placement: (whenever
possible) Inspect all received containers and verify the correct number
of items arrived with the shipment. (See the packing list: If the
packing list is missing, contact the customer facility receiving
personnel.)
6
—
If there is an accessories crate or pallet, it is advisable to
— This will be located on the same pallet as the main
— CE must be present for system and crate
Agilent 5DX Installation
Advertisement
Table of Contents
