Table of Contents
Advertisement
Save the file and exit from Windows Explorer.
e.
You will need to reset the 5DX to allow the changes to be
f.
recognized. Before you continue, verify that there is no panel inside
the 5DX.
Select
g.
Shutdown.
Wait for the system to completely shut down. Select
h.
At the Dos prompt, type EXIT.
i.
Click on the "5DX Reset" icon on the desktop.
j.
After the reset completes, click on the "Start 5DX Interface" icon on
k.
the desktop.
When the interface prompts, log on.
l.
Select
m.
5DX. Wait for all of the startup sequence to complete.
In the
n.
Hardware Control
Click on the
o.
Click the buzzer
p.
alarm will sound.
Check your work
19.
(like the one on the left) are checked off.
40
User Interface > System Access > Shutdown > Long Term
Sytem Access > Startup > Automatic Startup
, select
User Interface
to open the Hardware Control window.
Lights/Lasers
button to turn it on and to verify that the audible
ON
— Verify that all steps are complete and all boxes
Confirm & Adjust > Panel Handling >
tab in the Hardware Control window.
Quit from 5DX
to restart the
Agilent 5DX Installation
.
Advertisement
Table of Contents
