Table of Contents
Advertisement
Select
b.
Select
c.
Verify a Customer Board
14.
customer.
If the customer already has 5DX systems in place, check a typical
application to be used on this machine. If this is the first 5DX on site,
verify that the customer's board will load and unload.
Back up the Hard Drive — Follow the procedure as described in
15.
detail in Chapter 3 of the System Administration Guide.
System Cleanup
16.
doors. Clean the system exterior removing any dirt, hand prints, etc.
Set the Clock
17.
Turn the Audible Alarm ON
18.
audible alarm sound when the light tower indicates RED, you must
perform the following procedure.
Using the Windows Explorer, go to the
a.
current software release installed on the system.
In the
b.
In the
c.
named
Under the
d.
"bBuzzerIndicatorInstalled=TRUE" to turn the buzzer ON or to
"=FALSE" to turn the buzzer OFF.
out by a
from the front of the line.
Agilent 5DX Installation
from the Adjust menu and press Enter.
Backup/Restore
Backup Adjustments
— Request a test panel/board from the
— Replace all electronic bay access panels and
— Set the system clock to the customer's time zone.
directory, locate the
Calib
, perform a search to locate the server section
cxobj.cfg file
.
INDICTRS
section, edit the line
INDICTRS
;
symbol. To make the line effective, you will delete the
and press Enter.
— If the customer wants to have the
directory for the
Calib
file.
cxobj.cfg
NOTE: the line may be commented
;
symbol
39
Advertisement
Table of Contents
