Chapter 5. Firmware Upgrade Guide
The MCU (Micro Controller Unit) operates the system after you install the firmware program for
Smart Plus. You must update the firmware program when a new function or patch is released to
keep the system up to date.
1.
Installing Firmware Upgrade Software
Follow the procedure below to install the firmware upgrade software.
1) Run flash_loader_demo_v2.8.exe.
2) Continue with installation procedures as shown below:
VT-TECH-Smart Plus-001
You can download the software at http://www.st.com/en/development-tools/flasher-
stm32.html.
155 / 188
Smart Plus (PHT-35LHS)
Technical Manual
COPYRIGHT© 2018 VATECH
.
ALL RIGHTS RESERVED