How To Reset Parameters To Their Default Values - SEH myUTN utnserver Pro User Manual

USB Deviceserver User Manual macOS
7.2

How to Reset Parameters to their Default Values

You can reset the UTN to its default values, e.g. if you want to install the UTN server in a different network. All set-
tings will be set to factory settings. Installed certificates will not be deleted.
Important:
The connection to the utnserver Control Center may be interrupted if the IP
address of the UTN server changes with the reset.
If required, determine the new IP address  39.
You can change the settings either via remote access (utnserver Control Center and SEH Product Manager) or us-
ing the Reset button on the UTN server.
If you lost the password for the utnserver Control Center, you can reset the UTN server
using the reset button. You do not need a password to do so.
• Resetting Parameters from the utnserver Control Center  91
• Resetting Parameters from the SEH Product Manager  91
• Resetting Parameters via Reset Button  91
Resetting Parameters from the utnserver Control Center
1. Start the utnserver Control Center.
2. Select MAINTENANCE – Default settings.
3. Click Reset device.
A security query appears.
4. Confirm the security query.
 The parameters are reset.
Resetting Parameters from the SEH Product Manager
The SEH Product Manager allows you to reset one or more UTN servers.
 The SEH Product Manager is installed on the client  14.
 The device is shown in the device list  14.
1. Start the SEH Product Manager.
2. In the device list, select the UTN server.
3. In the menu bar, select Device – Reset.
The Reset dialog appears.
4. Click Reset.
 The parameters are reset.
Resetting Parameters via Reset Button
With the reset button you can reset the UTN server's parameter values to their default settings.
1. Press the reset button for 5 seconds.
The UTN server restarts.
 The parameters are reset.
91
Maintenance