SEH myUTN utnserver Pro User Manual page 77

USB Deviceserver User Manual macOS
The certification authority creates the certificate and gives it to you.
Important:
The certificate must be in 'base64' format.
9. Click Requested certificate.
10. Enter the password into the Password box.
11. Click Install.
 The requested certificate is installed in the UTN server.
Installing a PKCS#12 Certificate
Important:
If a PKCS#12 certificate has already been installed in the UTN server, you must first
delete the certificate  74.
 The certificate has 'base64' format.
1. Start the utnserver Control Center.
2. Select SECURITY – Certificates.
3. Click PKCS#12 certificate.
4. Specify the PKCS#12 certificate in the Certificate file box.
5. Enter the password.
6. Click Install.
 The PKCS#12 certificate will be installed in the UTN server.
Installing an S/MIME Certificate (myUTN-2500 only)
Important:
If an S/MIME certificate has already been installed in the UTN server, you must first
delete the certificate  74.
 The certificate has 'pem' format.
1. Start the utnserver Control Center.
2. Select SECURITY – Certificates.
3. Click S/MIME certificate.
4. Specify the S/MIME certificate in the Certificate file box.
5. Click Install.
 The S/MIME certificate is installed in the UTN server.
Installing a CA Certificate
 The certificate has 'base64' format.
1. Start the utnserver Control Center.
2. Select SECURITY – Certificates.
3. Click CA certificate.
4. Specify the CA certificate in the Certificate file box.
5. Click Install.
 The CA certificate is installed in the UTN server.
73
Security