SEH myUTN utnserver Pro User Manual page 62

USB Deviceserver User Manual macOS
Customizing the email subject
You can specify the content of the email subject line with a–z, A–Z, 0–9 and using variables:
%P = product type %p = model
%I = IP address %M = MAC address
1. Start the utnserver Control Center.
2. Select DEVICE – Notification.
3. Enter the desired variables in the Email Subject box.
4. To confirm, click Save.
 The settings will be saved.
Configuring event and system notifications via SNMP traps
The event SNMP traps can be sent to up to two recipients.
 SNMPv1 or/and SNMPv3 is set up  68.
1. Start the utnserver Control Center.
2. Select DEVICE – Notification.
3. Enter the IP address of the recipient in the Address box.
4. Enter the community of the recipient in the Community box.
5. Select the SNMP protocol version from the SNMP Version list.
6. Enable the desired messages in the Content area.
7. To confirm, click Save.
 The settings will be saved.
%N = default name
%E = event
58
Device Settings
%H = host name
%D = date %t = time