SEH myUTN utnserver Pro User Manual page 31

USB Deviceserver User Manual macOS
UTN Actions are for realizing simple scenarios, such as activating a connection, as well as complex procedures,
such as activating a connection and starting an application with time delay. You can create the UTN action with a
wizard. The wizard is only available in the complete version ( 11) of the SEH UTN Manager. You can create the
following UTN Actions:
• UTN Actions which activate and deactivate the device
The wizard will automatically create one UTN Action for the activation and one UTN Action for the deactivation of the USB port, inclu-
ding the connected USB device. Both UTN Actions will be saved to the desktop.
• UTN Action which starts an application and activates the device
After the selection of the application by the user, the wizard will automatically create a UTN Action to start the application and activate
the USB port, including the connected USB device.Additionally, you can define a port deactivation after the application is closed.
• Custom UTN Action (Experts only)
With the help of the wizard, a custom UTN Action can be created. You can create:
- UTN Actions for the activation and deactivation of the USB port and the connected USB device. You can define additional options.
- A script for starting the application and activating the USB port and the connected USB device. Additionally, you can define a delay
for the start of the application, the deactivation of the USB port after the closing of the application and additional options. Finally,
the complete UTN Action will be created automatically by the SEH UTN Manager and saved by the user.
UTN Actions are based on the command line tool 'utnm' . We recommend experts to
use this tool, if they want to create very complex scripts without restraints
 The SEH UTN Manager (complete version) is installed on the client  11.
 The USB port is shown in the selection list  20.
1. Start the SEH UTN Manager.
2. Select a port from the selection list.
3. In the menu bar, select Port – Create UTN Action.
The dialog Create UTN Action appears.
4. Follow the instructions of the wizard.
 A UTN Action will be created. The UTN Action is run by double-clicking the file.
Figure 3.5-1: Create UTN Action dialog
Working with the SEH UTN Manager
27
 33.