How To End The Connection Between The Usb Device And The Client - SEH myUTN utnserver Pro User Manual

USB Deviceserver User Manual macOS
3.3

How to End the Connection between the USB Device and the Client

If a USB device is connected to a client, the connection is of a point-to-point type. As long as the connection is
established, other users cannot connect the USB device to their client and thus cannot use it. For this reason, you
have to end the connection once you are no longer using the USB device.
To end the connection between USB device and client, deactivate the connection between the client and the USB
port of the UTN server to which the USB device is connected.
• Usually the connection is cut by the user via the SEH UTN Manager  23.
• The administrator can also end the connection from the utnserver Control Center  23.
• You can also set up an automatic deactivation (Auto Disconnect)  25.
Disconnecting the Device Using the SEH UTN Manager
 The SEH UTN Manager (complete version) is installed on the client  11.
 The USB port is shown in the selection list  20.
 The USB port is connected to your client  22.
1. Start the SEH UTN Manager.
2. In the selection list, select the port.
3. Select Port – Deactivate from the menu bar.
 The connection will be deactivated.
Disconnecting the Device Using the utnserver Control Center
 A USB port is connected to your client  22.
1. Start the utnserver Control Center.
2. Select DASHBOARD.
3. Choose the active connection from the Attached devices list and click the
4. Confirm the security query.
 The connection will be deactivated.
Working with the SEH UTN Manager
23
icon.