How To Assign A Name To A Usb Port - SEH myUTN utnserver Pro User Manual

USB Deviceserver User Manual macOS Security
6.8

How to Assign a Name to a USB Port

By default, the names of the connected USB devices are displayed on the USB ports in the utnserver Control Cen-
ter and SEH UTN Manager. These names are specified by the device manufacturers and might be ambiguous or
inaccurate.
That is why you can assign freely definable names to the USB ports, e.g. the name of a corresponding software.
This gives you a better overview of the USB devices available in the network.
1. Start the utnserver Control Center.
2. Select SECURITY – USB.
3. Enter a name for the desired USB port in the Name box.
4. To confirm, click Save.
 The settings will be saved.
78