USB Deviceserver User Manual macOS
2.1
Administration using the utnserver Control Center
The UTN server has a user interface, the utnserver Control Center, which can be opened using an Internet
browser (e.g. Safari).
The UTN server can be configured, monitored and maintained using the utnserver Control Center.
• Opening utnserver Control Center in the Browser 9
• Opening utnserver Control Center from SEH UTN Manager 9
• Opening utnserver Control Center from SEH Product Manager 9
• 9
Opening utnserver Control Center in the Browser
The UTN server is connected to the network and the power grid.
The UTN server has a valid IP address 39.
1. Open your browser.
2. Enter the IP address of the UTN server as the URL.
The utnserver Control Center will be displayed in the browser.
Important:
If the utnserver Control Center is not displayed, check if a gateway is
configured ( 39) and the proxy settings of your browser.
Opening utnserver Control Center from SEH UTN Manager
The UTN server is connected to the network and the power grid.
The UTN server has a valid IP address 39.
The SEH UTN Manager is installed on the client 11.
1. Start the SEH UTN Manager.
2. In the selection list, select the UTN server.
3. In the menu bar, select UTN Server – Configure.
Your browser opens and the utnserver Control Center is displayed.
Opening utnserver Control Center from SEH Product Manager
The utnserver Control Center is displayed directly in the SEH Product Manager. You can also open it separately in
the browser.
The SEH Product Manager is installed on the client 14.
1. Start the SEH Product Manager.
2. In the device list, select the UTN server.
The utnserver Control Center is displayed on the right side in the integrated browser.
3. To access the utnserver Control Center separately in the browser, select Launch Browser from the Device
menu.
our browser opens and the utnserver Control Center is displayed.
9
Administration Methods
Need help?
Do you have a question about the myUTN utnserver Pro and is the answer not in the manual?