SEH myUTN utnserver Pro User Manual page 108

USB Deviceserver User Manual macOS
Table 8.3-5: Parameter list – POP3
Parameters
pop3
[POP3]
pop3_srv
[Server address]
pop3_port
[Server port]
pop3_sec
[Security]
pop3_poll
[Check mail every]
pop3_limit
[Ignore mail exceed-
ing]
pop3_usr
[User name]
pop3_pwd
[Password]
Value Default
on/off off
max. 128 characters [blank]
1-65535 110
[1–5 characters; 0–
9]
0-2 0
[1 character; 0–2]
1-10080 2
[1–5 characters; 0–
9]
0-4096 4096
[1–4 characters; 0–
9]
max. 128 characters [blank]
max. 128 characters [blank]
Description
Enables/disables the POP3 functionality.
Defines the POP3 server via its IP address or
host name.
A host name can only be used if a DNS server (
39) was configured beforehand.
Defines the port which the UTN server uses to
receive emails.
The default port number for POP3 is 110. The
default port number for SSL/TLS (parameter
'POP3 – Security'  46) is 995. If required, read
the documentation of your POP3 server.
Defines the authentication method to be used:
• APOP: encrypts the password when logging
on to the POP3 server.
• SSL/TLS: encrypts the entire communication
with the POP3 server. The encryption
strength is defined via the encryption proto-
col and level  64.
0 = no security
1 = APOP
2 = SSL/TLS
Defines the time interval (in minutes) which
with the POP3 server is checked for emails.
Defines the maximum email size (in Kbyte) to be
accepted by the UTN server.
0 = unlimited
Defines the user name used by the UTN server
to log on to the POP3 server.
Defines the user password used by the UTN
server to log on to the POP3 server.
104
Appendix