SEH myUTN utnserver Pro User Manual page 38

USB Deviceserver User Manual macOS
Command
-c "command string"
or
--command "command string"
Description
Runs a command. The command is specified in greater detail by the com-
mand string. Command strings:
•
activate server port number
activates the connection to a USB port and the connected USB device.
•
activate server vendor ID (VID) product ID (PID)
activates the connection to a USB port and the first free connected
USB device with the defined IDs, if several identical USB devices are
connected to the UTN server.
• deactivate server port number
deactivates the connection to a USB port and the connected USB de-
vice.
• set autoconnect=true|false server port number
activates/deactivates Auto-Connect ( 25) for the USB port.
•
set userportkey=port key server port number
stores a USB port key ( 81) locally on the system for the current
user account. This way, the USB port key is always automatically sent
and does not need to be specified each time with the command
k USB port key or
(To remove the USB port key use the command string
set userportkey= server port number
Important: The command only sets the key permanently to
make the USB device available.
The USB port key configuration is done via the utnserver
Control Center  81.
•
set autoconnectportkey=port key server port number
stores a USB port key ( 81) locally and system-wide for the Auto-
Connect function ( 25). This way, the USB port key is always auto-
matically sent and does not need to be specified each time with the
command
-k USB port key
(To remove the USB port key use the command string
set autoconnectportkey= server port number
Important:
The command only sets the key permanently to make the
USB device available.
The USB port key configuration is done via the utnserver
Control Center  81.
• find [IP address-IP address]
searches for all UTN servers in the network segment and shows the
UTN servers found with IP address, MAC address, model and software
version. IP address ranges can also be searched.
• find6
Searches for all UTN servers in the network segment via IPv6 and
shows the servers found with IP address, MAC address, model and
software version.
34
Working with the SEH UTN Manager
--key USB port key
or
--key USB port key
-
(see below).
)
(see below).
)