Administration Via The Seh Product Manager - SEH myUTN utnserver Pro User Manual

USB Deviceserver User Manual macOS
2.3

Administration via the SEH Product Manager

The 'SEH Product Manager' is a software tool developed by SEH Computertechnik GmbH for the administration
and management of SEH Computertechnik GmbH devices on the network.
• Function  14
• Installation  15
• Program Start  16
Function
The software is installed on all clients from which SEH Computertechnik GmbH devices are to be administrated
and managed on the network.
After starting the SEH Product Manager, the network is first scanned for connected SEH Computertechnik GmbH
devices. All found devices are displayed in the 'device list' . You can select and then administer and manage the
devices in the device list.
If a task can be performed using the SEH Product Manager, this will be described in the corresponding chapter.
Important:
The SEH UTN Manager can be used in IPv4 and IPv6 environments. The selection
determines which IP version is used in the software.
"IPv4" is default. Selecting "IPv6" is only suitable for IPv6 networks. If you are not
sure about your network, select "IPv4 and IPv6".
1
2
6
Figure 2.3-1: SEH Product Manager
3
4
14
Administration Methods
5