First Steps - SEH myUTN utnserver Pro User Manual

USB Deviceserver User Manual macOS
1.5

First Steps

1. Read and observe the security regulations in order to avoid damages to people and devices  6.
2. Install the hardware. Hardware installation includes connecting the UTN server to the network, USB devices,
and power grid   'Quick Installation Guide'.
3. Install the software. Software installation includes installing the required 'SEH UTN Manager' software tool on
your client and assigning an IP address   'Quick Installation Guide'.
4. Configure the UTN server so that it is optimally embedded it into your network and sufficiently protected. All
information on how to do this you will find in this document.
5. Use the SEH UTN Manager to establish and manage connections to the USB devices which are connected to
the UTN server   'Working with the SEH UTN Manager'  19.
You can find information on the USB Deviceserver documentation in the chap-
ter'Documentation'
 3.
7
General Information