SEH myUTN utnserver Pro User Manual page 45

USB Deviceserver User Manual macOS
Determining the IPv4 Address using the SEH Product Manager
 The SEH Product Manager is installed on the client  14.
1. Start the SEH Product Manager.
The device list is displayed.
2. Search for the UTN server in the device list. It can be identified by its product type and MAC address (which
can be found on the device type plate).
3. Read the IP address of the UTN server from the device list.
If you select the UTN server in the device list, the utnserver Control Center will be dis-
played. If necessary, you can assign the IPv4 network configuration directly there
39).
41
Network Settings
(