SEH myUTN utnserver Pro User Manual page 125

USB Deviceserver User Manual macOS
Table 8.3-20: Parameter list – USB device access control
Important:
Some parameters can be assigned to a USB port twice, e.g. two USB port keys per
USB port.
These parameters are assigned to the USB ports as follows:
USB port 01 = Parameter number '_01' and '_21' .
USB port 02 = Parameter number '_02' and '_22' .
...
USB port 10 = Parameter number '_10' and '_30' .
USB port 11 = Parameter number '_11' and '_31' .
...
USB port 19 = Parameter number '_19' and '_39' .
USB port 20 = Parameter number '_20' and '_40' .
Parameters
utn_dscr_1
~
utn_dscr_20
[Descripton]
utn_accctrt_1
~
utn_accctrt_20
[Method]
utn_pkkey_1
~
utn_pkkey_40
[Key]
utn_pkvalid_1
~
utn_pkvalid_40
[Validity]
Value Default
max. 128 charac- [blank]
ters
[a–z, A–Z, 0–9]
--- ---
ids
key
keyids
max. 64 characters [blank]
[a–z, A–Z, 0–9]
off off
ever
week
date
Description
Allows a description of the USB port. The writ-
ten information is displayed on the properties
page of the SEH UTN manager for the corre-
sponding USB port.
(A line break can be created with <br>.)
Defines the method(s) for limiting the access
and use of the USB port and the connected USB
device.
--- =no protection
ids =device assignment
key =port key control
keyids=device assignment and port key control
Defines the key for the USB port and the con-
nected USB device when port key control is
used.
Defines the validity of a port key. Validity allows
you to specify when users can use a USB port
and the USB device connected to it.
off = off
ever = always (permanently valid)
date = expires on
week = weekly
121
Appendix