SEH myUTN utnserver Pro User Manual page 93

USB Deviceserver User Manual macOS
Loading the Parameter File utnserver Control Center onto a UTN Server
1. Start the utnserver Control Center.
2. Select MAINTENANCE – Backup.
3. In the Parameter file – Restore area, specify the '<default name>_parameters.txt' file in the Parameter file
box.
4. Click Import.
 The UTN server adopts the parameter values from the file.
Loading the Parameter File via SEH Product Manager onto a UTNServer
You can load the parameter file onto one or more UTN servers.
WARNING
Some parameters (e.g. a static IPv4 network configuration) must be assigned indi-
vidually. Conflicts can occur if you load the parameter file on multiple UTN servers
at the same time.
Only upload parameter files to multiple UTN servers at the same time if the settings
are universal.
 The SEH Product Manager is installed on the client  14.
 The device is shown in the device list  14.
1. Start the SEH Product Manager.
The device list is displayed.
2. Select the UTN server(s) in the device list.
3. In the menu bar, select Device – Load parameter.
The Load parameter dialog appears.
4. Follow the instructions in the dialog.
 The UTN server adopts the parameter values from the file.
89
Maintenance