SEH myUTN utnserver Pro User Manual page 121

USB Deviceserver User Manual macOS
Table 8.3-16: Parameter list – SNMP
Parameters
snmpv1
[SNMPv1]
snmpv1_ronly
[Read-only]
snmpv1_community
[Community]
snmpv3
[SNMPv3]
any_hash
[Hash]
any_rights
[Access rights]
any_cipher
[Encryption]
admin_hash
[Hash]
admin_rights
[Access rights]
admin_cipher
[Encryption]
Important:
The administrator user account and the read access user account are also used as
SNMP user accounts ( 68). Consider this when setting up user accounts.
Value Default
on/off on
on/off off
max. 64 characters public
[a–z, A–Z, 0–9]
on/off on
md5 md5
sha
--- readonly
readonly
readwrite
--- ---
aes
des
md5 md5
sha
--- readwrite
readonly
readwrite
--- ---
aes
des
Description
Enables/disables SNMPv1.
Enables/disables the write protection for the
community.
SNMP community name Enter the name as it is
defined in the monitoring station.
Important:
The default name is 'public' . This
name is commonly used for read/
write communities. We recom-
mend to change it as soon as possi-
ble to increase security.
Enables/disables SNMPv3.
Specifies the hash algorithm for SNMP user
group 1.
Defines the access rights of the SNMP user
group 1.
--- = none
Defines the encryption method of the SNMP
user group 1.
--- = none
Specifies the hash algorithm for SNMP user
group 2.
Defines the access rights of the SNMP user
group 2.
--- = none
Defines the encryption method of the SNMP
user group 2.
117
Appendix