Advertisement
Quick Links
Overview
This Hardware Installation Guide provides a brief description of the hardware
installation of the print server. It contains the following information:
Scope of Supply
Safety Regulations
Print Server Controls and Technical Data
Mounting the Print Server
Notification
Information and Hotline
To obtain additional information about your print server, please refer to the
documentation on the Product CD. Should you have any further questions, please
contact our support hotline.
Monday - Thursday
Friday
℡
+49 (0)521 94226-44
@
support@seh.de
Hardware Installation Guide
Print Server
PS1106
Hardware Installation Guide
8:00 a.m. to 4:45 p.m. and
8:00 a.m. to 3:15 p.m. (CET)
1
Advertisement
Related Manuals for SEH PS1106
Summary of Contents for SEH PS1106
- Page 1 Print Server PS1106 Hardware Installation Guide Overview This Hardware Installation Guide provides a brief description of the hardware installation of the print server. It contains the following information: Scope of Supply Safety Regulations Print Server Controls and Technical Data Mounting the Print Server...
-
Page 2: Scope Of Supply
- Installation Manuals (The pdf files provide a detailed description of the software installation under each of the supported operating systems.) - InterCon-NetTool (Administration tool), - SEH Printer Wizard (Printer Installation Wizard), - SEH Print Monitor, - SEH Private-MIB, - Adobe Reader... -
Page 3: Safety Regulations
Safety Regulations English [en] Print servers are network interfaces for printers in office environments and are designed for the direct integration of printers into networks. Before starting the initial operation procedure of your device, please note the following safety regulations: •... - Page 4 • Lisez attentivement la documentation et assurez-vous que votre système satisfait bien toutes les exigences mentionnées. • Evitez le contact avec l'humidité ou avec le liquide. • Le périphérique doit être connecté et exploité uniquement en parfait état de fonctionnement. •...
- Page 5 • Non collegare linee telefoniche al connettore RJ-45. Tutti i connettori RJ-45 devono essere collegati solo con tensioni SELV. Per il collegamento al connettore RJ-45, utilizzare esclusivamente cavi S/UTP (categoria 5 o meglio). La schermatura al connettore deve essere fissata in piano. •...
- Page 6 Printservere er netværksgrænseflader til printere i kontormiljøer og bruges til at integrere printere direkte i netværk. Inden De tager Deres apparatet i brug, skal De være opmærksom på følgende sikkerhedsforskrifter: • Læs det tilhørende skriftlige materiale, og kontroller, at Deres system opfylder de angivne krav.
- Page 7 • Voor het uitpakken moeten maatregelen worden getroffen om te voorkomen dat het apparaat beschadigingen oploopt door elektrostatische ontlading. • Verbind geen telefoonleidingen met de RJ-45-stekker. Hierop mag uitsluitend extra lage spanning (SELV, safety extra-low voltage) worden aangesloten. Gebruik voor de aansluiting op de RJ-45-stekker uitsluitend S/UTP-kabels (categorie 5 of hoger).
- Page 8 Eesti [et] Printserverid on võrguliidesed bürooprinterite jaoks ning nende ülesandeks on printerite otsene ühendamine võrku. Lugege enne seadme kasutuselevõtmist läbi järgnevad ohutusjuhised: • Lugege dokumentatsioon läbi ning kontrollige, kas Teie süsteem vastab loetletud nõuetele. • Seade ei tohi kokku puutuda niiskuse ega vedelikega. •...
- Page 9 • Iekārtu drīkst pieslēgt un ekspluatēt tikai nebojātā stāvoklī. • Visus kabeļus novietojiet tā, lai neviens nevarētu uz tiem uzkāpt vai aizķerties aiz tiem. • Pirms izpakošanas, lūdzu, veikt attiecīgus pasākumus, lai novērstu bojājumus elektrostatiskās izlādēšanās rezultātā. • Pie RJ-45 tipa kontaktspraudņa nepievienojiet telefona vadus. Pie tās drīkst pieslēgt tikai drošības zemspriegumu.
- Page 10 Česky [cs] Tiskové servery jsou sít’ová rozhraní pro tiskárny v kancelářském prostředí a slouží pro přímé sdílení tiskáren v sítích. Před uvedením tiskového serveru do provozu dodržujte následující bezpečnostní předpisy: • Přečtěte si dokumentaci a zajistěte, aby Váš systém odpovídal uvedeným požadavkům.
- Page 11 • Aghmel ćert li hadd ma jirfes jew jaqa' fuq il-kejbils. • Qabel ma tnehhi t-tgeżwir ta’l-apparat, hu l-prekawzjonijiet kollha mehtiega sabiex tevita li taghmel hsara lill-bord ta’l-apparat eż. skariki elettrostatići ećć. • Tqabbadx kejbil tat-telefon mal-konnettur RJ-45. Il-konnettur RJ-45 ghandu jigi mqabbad biss mal-vultaggi SELV.
-
Page 12: Print Server Controls And Technical Data
Print Server Controls and Technical Data 1) Status button 2) RJ-45 connector for 1000BaseT, 100BaseTX and10BaseT 3) Link indicator LED (green): The LED lights up when a (physical) connection to the network is available. 4) Network activity LED (yellow): The LED lights up when data packets are being received. -
Page 13: Mounting The Print Server
Mounting the Print Server The print server is a so-called slot card that is simply inserted into the provided slot. Prepare the printer Proceed as follows: 1. Turn the printer off. 2. Disconnect the printer's power cord. 3. Remove the screws from the interface cover. 4. - Page 14 Notification The latest version of the EC declaration of conformity can be downloaded from the homepage of SEH Computertechnik GmbH: http://www.seh-technology.com/services/ce-notification.html Hardware Installation Guide...
- Page 15 Hardware Installation Guide...
- Page 16 © 2011 SEH Computertechnik GmbH All trademarks, registered trademarks, logos and product names are property of their respective owners. This product uses ’Open Source Software’ . For further information, please contact http://www.seh.de. The product documentation gives you valuable information about your product.