Administration Via Email - SEH myUTN utnserver Pro User Manual

USB Deviceserver User Manual macOS
2.4

Administration via Email

You can administrate the UTN server via email and thus from any computer Internet access (remote access):
• Get UTN server status
• Set UTN server parameters
• UTN server update
To do so, you write commands into the email message header table 2.4-1 17.
Table 2.4-1: Commands and comment:
Commands Option
get status
<Command>
get parameters
set parameters
update utn
help
[<Comment>]
The following applies to the instructions:
• not case-sensitive
• one or more space characters are allowed
• max. length is 128 byte
• only the ASCII format can be read.
In addition, a TAN is needed to execute updates or parameter changes. To begin with, you have to get a status
page via email (table 2.4-1 17) because it contains the TAN. You enter the received TAN into the email message
body. A space character must follow.
 An email user account for the UTN server is set up on a POP3 server.
 An email user account for the UTN server is set up on an SMTP server.
 A DNS server is configured on the UTN server  39.
 POP3 and SMTP parameters have been configured on the UTN server  46.
1. Open an email program.
2. Write a new email:
- As recipient enter the UTN server address.
- Enter a command in the subject line:
Commands and comments: table 2.4-1 17.
- Into the email message body enter a TAN, if applicable.
3. Send the email.
 The UTN server receives the email and carries out the instruction.
Description
You get the UTN server status page.
You get the UTN server parameter list.
Sends one or more parameters to the UTN server which will then
be adopted by the UTN server.
Write the parameters and their values into the email message
body: <parameter> = <value>
The syntax and values can be found in the parameter lists  99.
Carries out an automatic update using the software that is
attached to the mail.
You get a page with information on remote maintenance.
Freely definable text for descriptions.
cmd: <command> [<comment>]
17
Administration Methods