SEH myUTN utnserver Pro User Manual page 112

USB Deviceserver User Manual macOS
Table 8.3-9: Parameter list – Description
Parameters
sys_name
[Host name]
sys_descr
[Description]
sys_contact
[Contact person]
Table 8.3-10: Parameter list – Date/Time
Parameters
ntp
[Date/Time]
ntp_server
[Time server]
ntp_tzone
[Time zone]
Important:
The hardware clock settings ( 53) are stored in the hardware clock itself. Config-
uration using parameters is not possible.
Value Default
max. 64 characters [blank]
[a–z, A–Z, 0–9]
max. 64 characters [blank]
[a–z, A–Z, 0–9]
max. 64 characters [blank]
[a–z, A–Z, 0–9]
Value Default
on/off on
max. 64 characters pool.ntp.org
[a–z, A–Z, 0–9]
UTC, GMT, EST, EDT, CET/CEST
CST, CDT, MST, MDT, (EU)
PST, PDT, etc.
Description
Device name as alternative to IP address. With a
name you can identify the UTN server more eas-
ily in the network, e.g. if you are using several
UTN servers.
Displayed in the utnserver Control Center, the
SEH UTN Manager and the SEH Product Man-
ager.
Device description, e.g. location or department.
Displayed in the utnserver Control Center, the
SEH UTN Manager and the SEH Product Man-
ager.
Contact person, e.g. device administrator.
Is displayed in the utnserver Control Center.
Description
Enables/disables the use of a time server (SNTP).
Defines a time server by its IP address or host
name.
A host name can only be used if a DNS server (
39) was configured beforehand.
Important:
If your network in configured
accordingly, the UTN server
receives the time server settings
automatically via DHCP. A time
server assigned in such a manner
always takes precedence over man-
ual settings.
Compensates Coordinated Universal Time (UTC)
for location and national particularities (day-
light saving time etc.).
108
Appendix