Christie CineLife+ 4 Series Technical Reference page 12

Commands
Command Description
GAM? Returns the active gamma file. (Read-only)
GAM?L Returns a list of all available gamma files. (Read-
only)
GAM "<file>" Sets the gamma file for the active channel.
GAM+CHAN? Gets the gamma file for the specified channel.
"<channel>" (Read-only)
GAM+CHAN Sets the gamma file for the specified channel.
"<channel>" "<file>"
Examples
Return the active gamma file:
(GAM?)
Result:
(GAM! "Gamma 2.6")
Return a list of all available gamma files:
(GAM?L)
Result:
(GAM!L001 001 000 "Gamma 2.4")
(GAM!L001 001 001 "Gamma 2.6")
...
Set the specified gamma file for the active channel:
(GAM "Gamma 2.4")
Return the gamma file used by the specified channel:
(GAM+CHAN? "Media Block Flat")
Result:
(GAM+CHAN! "Gamma 2.6")
Set the gamma file for the specified channel to the specified file:
(GAM+CHAN "Media Block Flat" "Gamma 2.4")
Set the gamma file for the specified channel to the specified file at index 1 from the previous listing:
(GAM+CHAN "Media Block Flat" 1)
CineLife+ Technical Reference–Serial Commands
020-103075-05 Rev. 1 (09-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
™
CineLife+ serial commands
Values
—
—
file = Subject to the range returned in
GAM?L
channel = The name of a specific
channel
channel = The name of a specific
channel
file = Subject to the range returned in
GAM?L
12