Connecting E1 Interface Cables - H3C SR6602-I Installation Manual
Ai-powered ict converged gateways
Hide thumbs
Also See for SR6602-I:
- Hardware information (33 pages) ,
- Installation, quick start (29 pages)
Table of Contents
Advertisement
4.
Identify the Rx and Tx ports on the transceiver module. Use the optical fiber to connect the Rx
port and the Tx port on the transceiver module to the Tx port and the Rx port on the peer device,
respectively.
Figure7-1 Connecting a transceiver module and optical fiber
Connecting E1 interface cables
The MIC-X-ET16 interface card provides E1 ports. To connect an E1 port by using an E1 interface
cable, see the interface card manual.
7-2
Advertisement
Table of Contents
