Replacing A Dimm - H3C SR6602-I Installation Manual

Ai-powered ict converged gateways

Hide thumbs Also See for SR6602-I:

Table of Contents

Install a new M.2 SSD. For the installation procedure, see

If you are not to install a new M.2 SSD, insert the M.2 SSD screw into the screw hole and then

reinstall the access panel.

Replacing a DIMM

Power off the device.

Remove the access panel. For more information, see

Open the DIMM slot latches and pull the DIMM out of the slot

Figure10-16 Removing a DIMM

Place the removed DIMM on an antistatic mat.

Install a new DIMM. For the installation procedure, see

If you are not to install a new DIMM, reinstall the access panel.

"Installing an M.2 SSD

"Replacing a storage

"Installing a

10-11

drive."

controller."

DIMM."

Table of Contents

Sr6602-ie