H3C SR6602-I Installation Manual page 55
Ai-powered ict converged gateways
Hide thumbs
Also See for SR6602-I:
- Hardware information (33 pages) ,
- Installation, quick start (29 pages)
Table of Contents
Advertisement
3.
Use a Phillips screwdriver to remove the screws that secure the riser module to the chassis.
Figure10-9 Removing the screws that secure the riser module to the chassis
4.
Loosen the captive screws on the riser module and lift the riser module slowly out of the chassis
and remove the cables from the riser module.
Figure10-10 Removing the riser module
10-7
Advertisement
Table of Contents
