H3C SR6602-I Installation Manual page 72

2. From the BIOS screen, press Ctrl+A in time as promoted.
The storage controller information is displayed, as shown in Figure12-5.
If you fail to press Ctrl+A in time, the system returns to the BootWare screen, starts up, and
enters the CLI.
Figure12-5 BIOS screen
3. On the storage controller configuration screen as shown inFigure12-6, select Array
Configuration and press Enter.
Figure12-6 Storage controller configuration screen
Table12-2 Option description
Option
Controller Details
Configure Controller Settings
Array Configuration
Disk Utilities
4. On the storage controller configuration screen as shown in Figure12-7, select Create Array
and press a key.
Description
Allows you to view storage controller configuration information.
Allows you to configure settings and restore the default settings for
the storage controller.
Allows you to create and manage RAID arrays.
Allows you to view physical drive information, locate drives, and
format drives.
12-4