H3C VG Series Operation Manual
H3C VG Series Operation Manual

H3C VG Series Operation Manual

Voice gateways
Hide thumbs Also See for VG Series:

Advertisement

Quick Links

Operation Manual - Getting Started
H3C VG Series Voice Gateways
Chapter 1 Overview ....................................................................................................................... 1-1
1.1 Introduction to Voice Gateway........................................................................................... 1-1
1.2 VG Feature List.................................................................................................................. 1-3
Chapter 2 Fundamental Configuration........................................................................................ 2-1
2.1 Setting up Configuration Environment............................................................................... 2-1
2.2 Command Line Interface (CLI) .......................................................................................... 2-9
2.2.1 CLI Views ................................................................................................................ 2-9
2.2.2 CLI Online Help ..................................................................................................... 2-11
2.2.3 CLI Error Information............................................................................................. 2-12
2.2.4 Displaying History Configuration ........................................................................... 2-12
2.2.5 CLI Editing Functions ............................................................................................ 2-13
2.2.6 CLI Display Functions ........................................................................................... 2-13
2.2.7 Shortcut Keys ........................................................................................................ 2-14
2.3 Login Security Management ............................................................................................ 2-14
2.3.1 Configuring a User ................................................................................................ 2-14
2.3.2 Terminal Security Features ................................................................................... 2-16
2.3.3 Configuring Login Authentication and Authorization ............................................. 2-16
2.4 Basic System Configuration............................................................................................. 2-18
2.4.1 Basic System Configuration and Management..................................................... 2-18
2.4.2 Displaying the Statistics of VG .............................................................................. 2-19
2.5 Ethernet Configuration..................................................................................................... 2-20
2.5.1 Configuring Ethernet Interface .............................................................................. 2-20
2.5.2 Displaying and Debugging Ethernet Interface ...................................................... 2-24
2.5.3 DHCP Client Configuration Example .................................................................... 2-25
2.6 Default Route Configuration ............................................................................................ 2-25

Table of Contents

i
Table of Contents

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VG Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for H3C VG Series

  • Page 1: Table Of Contents

    Operation Manual – Getting Started H3C VG Series Voice Gateways Table of Contents Table of Contents Chapter 1 Overview ........................1-1 1.1 Introduction to Voice Gateway................... 1-1 1.2 VG Feature List........................1-3 Chapter 2 Fundamental Configuration..................2-1 2.1 Setting up Configuration Environment................2-1 2.1.1 Setting up Local Configuration Environment through the Console Port ....
  • Page 2: Chapter 1 Overview

    Chapter 1 Overview 1.1 Introduction to Voice Gateway H3C VG Voice Gateway (hereinafter referred to as VG), developed by Huawei-3Com Technology Co., Ltd. (hereinafter referred to as Huawei-3Com) for industrial and SOHO (small office/home office) users, is a new-generation access device which supports integration of voice and fax.
  • Page 3 Operation Manual – Getting Started H3C VG Series Voice Gateways Chapter 1 Overview Internet Telephone Telephone Figure 1-1 Typical networking of VG...
  • Page 4: Vg Feature List

    Operation Manual – Getting Started H3C VG Series Voice Gateways Chapter 1 Overview 1.2 VG Feature List Table 1-1 VG feature list Functional Attributes module Supports silence suppression, echo cancellation, comfortable noise, jitter buffer and volume turning. Supports special PBX functions (do-not-disturb, call forwarding on busy, unconditional call forwarding, alarm call service, group line access).
  • Page 5 Operation Manual – Getting Started H3C VG Series Voice Gateways Chapter 1 Overview Functional Attributes module Dynamic ARP and static ARP. IP service IP address management. Supports IP fast forwarding. performance Network layer IP routing Supports static route. protocol Filtering with Supports standard and extended ACL.
  • Page 6: Chapter 2 Fundamental Configuration

    Operation Manual – Getting Started H3C VG Series Voice Gateways Chapter 2 Fundamental Configuration Chapter 2 Fundamental Configuration 2.1 Setting up Configuration Environment 2.1.1 Setting up Local Configuration Environment through the Console Port I. Configuring in Windows 9x Connect the serial port of the workstation to the Console port of the VG to set up local configuration environment.
  • Page 7 Operation Manual – Getting Started H3C VG Series Voice Gateways Chapter 2 Fundamental Configuration Figure 2-3 Selecting serial port for the connection Figure 2-4 Setting parameters for the serial port...
  • Page 8 Operation Manual – Getting Started H3C VG Series Voice Gateways Chapter 2 Fundamental Configuration Figure 2-5 Selecting terminal emulation type Step 3: Power on the VG and it begins the self-test and load system programs. After the startup is completed, the VG prompts you to press <Enter> to enter the system view.
  • Page 9 Operation Manual – Getting Started H3C VG Series Voice Gateways Chapter 2 Fundamental Configuration Figure 2-6 Set up new connection Figure 2-7 Location Information window...
  • Page 10 Operation Manual – Getting Started H3C VG Series Voice Gateways Chapter 2 Fundamental Configuration Figure 2-8 Select a PC port for connection Figure 2-9 Set parameters for the port...
  • Page 11 Operation Manual – Getting Started H3C VG Series Voice Gateways Chapter 2 Fundamental Configuration Figure 2-10 Choose attributes Figure 2-11 Select the type of terminal emulation program Step 3: Power on the VG and it begins the self-test and load the system programs.
  • Page 12: Setting Up The Local Or Remote Configuration Environment By Using Telnet

    Operation Manual – Getting Started H3C VG Series Voice Gateways Chapter 2 Fundamental Configuration Step 4: You can configure the VG or view its running status through entering corresponding commands. Also you can enter “?” for online help. 2.1.2 Setting up the Local or Remote Configuration Environment by Using...
  • Page 13 Operation Manual – Getting Started H3C VG Series Voice Gateways Chapter 2 Fundamental Configuration Step 2: Start Telnet client program on the workstation and set terminal emulation type as VT100. See Figure 2-14 and Figure 2-15 (Telnet on Windows 9x).
  • Page 14: Command Line Interface (Cli)

    Operation Manual – Getting Started H3C VG Series Voice Gateways Chapter 2 Fundamental Configuration Note: In the whole process of configuring the VG through Telnet connection, do not change the IP address of the VG interface used in Telnet connection, otherwise the Telnet connection will terminate.
  • Page 15 Operation Manual – Getting Started H3C VG Series Voice Gateways Chapter 2 Fundamental Configuration The functions and corresponding commands for different CLI views are listed in Table 2-1. Table 2-1 Attribute list of CLI views Exit View Function Prompt Enter command...
  • Page 16: Cli Online Help

    Operation Manual – Getting Started H3C VG Series Voice Gateways Chapter 2 Fundamental Configuration Exit View Function Prompt Enter command command Enter Use the quit Configures Access “gw-access-num command parameters [VG-voice-dial-an number ber 12345” in the return to voice for access...
  • Page 17: Cli Error Information

    Operation Manual – Getting Started H3C VG Series Voice Gateways Chapter 2 Fundamental Configuration Display access-list information ARP table base-information Some essential system information client Current client information clock Current router clock information …… Partial help ---- You can get all commands starting with the string by entering a string and “?”...
  • Page 18: Cli Editing Functions

    Operation Manual – Getting Started H3C VG Series Voice Gateways Chapter 2 Fundamental Configuration Table 2-3 Display history commands Operation Command Display history command display history-command II. Viewing history commands Press the following composite keys in any CLI view to call the history commands.
  • Page 19: Shortcut Keys

    Operation Manual – Getting Started H3C VG Series Voice Gateways Chapter 2 Fundamental Configuration Table 2-6 Function keys for terminal display Operation Key(s) Stop display Press <Ctrl+C> during pause Continue display in next screen Press spacebar during pause Continue display in next line Press <Enter>...
  • Page 20 Operation Manual – Getting Started H3C VG Series Voice Gateways Chapter 2 Fundamental Configuration tracert Trace the route taken by packets to reach a network host undo Remove a command or restore its defaults A guest can only perform remote test on the VG and execute these commands:...
  • Page 21: Terminal Security Features

    Then restart the VG. Now you can directly log onto the system as administrator without being prompted to enter username and password. For details about the Boot menu, see the corresponding H3C VG voice gateway installation manual.
  • Page 22 Operation Manual – Getting Started H3C VG Series Voice Gateways Chapter 2 Fundamental Configuration I. Configuring login authentication and authorization scheme list You can configure user login authentication and authorization as local database authentication and authorization, RADIUS server authentication and authorization, or none.
  • Page 23: Basic System Configuration

    Operation Manual – Getting Started H3C VG Series Voice Gateways Chapter 2 Fundamental Configuration Perform the following configuration in system view. Table 2-11 Specify login authentication and authorization scheme list Operation Command Specify a login authentication login-method authentication-mode login-type and authorization scheme list...
  • Page 24: Displaying The Statistics Of Vg

    Operation Manual – Getting Started H3C VG Series Voice Gateways Chapter 2 Fundamental Configuration By default, the initial system time is 01:00:00 Jan 1 1998. Note: The system clock will return to the initial time when you first clear clock configuration in Boot menu or run the delete command and then restart the VG.
  • Page 25: Ethernet Configuration

    Display system version display version Display software version version See H3C VG Series Voice Gateways Command Manual for details about the commands listed above and the corresponding terminal display information. 2.5 Ethernet Configuration 2.5.1 Configuring Ethernet Interface Ethernet interface configuration tasks include:...
  • Page 26 Operation Manual – Getting Started H3C VG Series Voice Gateways Chapter 2 Fundamental Configuration Table 2-17 Set IP address for an Ethernet interface Operation Command Set IP address for an Ethernet interface ip address ip-address mask [ sub ] Delete IP address of an Ethernet...
  • Page 27 Operation Manual – Getting Started H3C VG Series Voice Gateways Chapter 2 Fundamental Configuration Table 2-18 Set an Ethernet interface to obtain its IP address through DHCP Operation Command Set an Ethernet interface to obtain its IP ip address dhcp-alloc...
  • Page 28 Operation Manual – Getting Started H3C VG Series Voice Gateways Chapter 2 Fundamental Configuration VI. Setting MTU The parameter MTU (maximum transmission unit) affects segmentation and reassembly of IP packets. Perform the following configurations in Ethernet interface view. Table 2-21 Set MTU...
  • Page 29: Displaying And Debugging Ethernet Interface

    Operation Manual – Getting Started H3C VG Series Voice Gateways Chapter 2 Fundamental Configuration Perform the following configurations in Ethernet interface view. Table 2-24 Enable or disabling loopback on an Ethernet interface Operation Command Enable loopback on the interface loopback...
  • Page 30: Dhcp Client Configuration Example

    Operation Manual – Getting Started H3C VG Series Voice Gateways Chapter 2 Fundamental Configuration 2.5.3 DHCP Client Configuration Example I. Network requirements DHCP client obtains its IP address from the DHCP server in the same network segment. The address pool (with the segment 10.1.1.0/24) of the DHCP server consists of two segments: 10.1.1.0/25 and 10.1.1.128/25.
  • Page 31 Operation Manual – Getting Started H3C VG Series Voice Gateways Chapter 2 Fundamental Configuration Table 2-27 Configure default route Operation Command ip route-static 0.0.0.0 { 0.0.0.0 | 0 } nexthop-address Configure default route [ preference value ] [ reject ] [ blackhole ] undo ip route-static 0.0.0.0 { 0.0.0.0 | 0 } [ interface-type...

Table of Contents