Deleting A Raid Array - H3C SR6602-I Installation Manual

Figure12-10 RAID array information
7. Press Esc to exit the RAID configuration screen. Then select Yes and press Enter to exit the
RAID configuration and BIOS screen and enter the BootWare screen.
Figure12-11 Exiting the RAID configuration screen

Deleting a RAID array

To remove a member drive from a RAID array and use it as an independent drive, you must delete
the RAID array on the device.
To delete a RAID array:
1. Start up the device. When the device enters the BootWare screen, press Ctrl+E as prompted in
time to access the BIOS screen.
If you fail to press Ctrl+E in time, the device will start up and enter the CLI.
12-6