Displaying device temperature information
Use the
display environment
<Sysname> display environment
System temperature information (degree centigrade):
------------------------------------------------------------------------------
Slot
Sensor
0
Outflow 1
0
Hotspot 1
0
Hotspot 2
0
Hotspot 3
1
Outflow 1
1
Hotspot 1
Table11-7 Command output
Field
System Temperature
information (degree centigrade)
Sensor
Temperature
LowerLimit
WarningLimit
AlarmLimit
ShutdownLimit
Displaying transceiver module information
Use the
display transceiver interface
transceiver modules, including the transceiver module type, connector type, central wavelength of
the transmit laser, signal transmission distance, and vendor name.
To display transceiver module information:
Task
Display key parameters of
transceiver modules.
command to display device temperature information.
Temperature
LowerLimit
36
0
56
0
44
0
46
0
52
0
69
0
Description
Temperature information (°C).
Temperature sensor:
•
•
•
Current temperature.
Lower temperature limit. If the device does not support this field, this field
displays NA.
Warning temperature threshold. If the device does not support this field,
this field displays NA.
Alarming temperature threshold. If the device does not support this field,
this field displays NA.
Shutdown temperature threshold. When the sensor temperature reaches
the limit, the system shuts down automatically. If the device does not
support this field, this field displays NA.
Command
display transceiver
interface
interface-type
[
interface-number
11-7
WarningLimit
64
93
80
88
66
80
hotspot—Hotspot sensor.
inflow—Air inlet sensor.
outflow—Air outlet sensor.
command to display the key parameters of
Remarks
Available for all transceiver
modules.
]
AlarmLimit
ShutdownLimit
68
N/A
95
N/A
100
N/A
110
N/A
68
N/A
100
N/A