Installing The Device By Using The Mounting Brackets And Slide Rails - H3C SR6602-I Installation Manual

Installing the device by using the mounting brackets and slide
rails
Figure3-1 Mounting brackets
(1) M6 screw installation position
(3) Mounting bracket
Figure3-2 Slide rail and chassis rail
(1) Rear end of the slide rail
(3) Chassis rail
To install the device by using the mounting brackets and slide rails:
1. Wear an ESD wrist strap and make sure the strap makes good skin contact and is reliably
grounded.
(2) Cable management bracket
(2) Front end of the slide rail
3-2