Installing The Device On A Workbench; Grounding The Device - H3C SR6602-I Installation Manual

Installing the device on a workbench

CAUTION:
• Make sure the workbench is stable and reliably grounded.
• Reserve a minimum clearance of 100 mm (3.94 in) around the chassis for heat dissipation.
• Do not place heavy objects on the device.
To install the device on a workbench:
1. Place the device upside down on the workbench and clean the four round holes in the chassis
bottom with a dry cloth.
2. Attach the four rubber feet to the round holes in the chassis bottom.
3. Place the device with upside up on the workbench.
Figure3-11 Installing the device on a workbench

Grounding the device

WARNING!
• Correctly connecting the grounding cable is crucial to lightning protection and EMI protection.
• Do not connect the device grounding cable to a fire main or lightning rod.
3-7