H3C SR6602-I Installation Manual page 30

Ai-powered ict converged gateways

Hide thumbs Also See for SR6602-I:

Table of Contents

10. Fasten the screws with a Phillips screwdriver to secure the riser module to the chassis.

Figure4-8 Securing the riser module to the device

11. Install the access panel:

a. Face the front panel of the device, place the access panel on top of the device chassis, and

align the pegs inside the access panel with the slots on the device side panels.

b. Press the locking lever downwards until it is locked in place.

c. Fasten the screw on the locking lever with a Phillips screwdriver to lock the locking lever.

Figure4-9 Installing the access panel

4-8

Table of Contents

Sr6602-ie