Mounting the device on a workbench
IMPORTANT:
• Make sure the workbench is clean, stable, and reliably grounded.
• Maintain a minimum clearance of 100 mm (3.94 in) around the device for heat dissipation.
• Do not place heavy objects on the device.
To mount the device on a workbench:
1.
Place the device upside down on the workbench and attach the rubber feet to the four round
holes in the chassis bottom.
2.
Place the device upside up on the workbench. Make sure the rubber feet stand securely on the
workbench.
Figure2-2 Mounting the device on a workbench
9