Installing The Device On A Workbench; Grounding The Device - H3C SR6602-I Installation, Quick Start

5

Installing the device on a workbench

CAUTION:
• Make sure the workbench is stable and reliably grounded.
• Do not place heavy objects on the device.
To install the device on a workbench:
1. Place the device upside down on the workbench and clean the four round holes in the chassis
bottom with a dry cloth.
2. Attach the four rubber feet to the round holes in the chassis bottom.
3. Place the device with upside up on the workbench.
Figure5-2 Installing the device on a workbench
6

Grounding the device

CAUTION:
Correctly connecting the grounding cable is crucial to lightning protection and EMI protection.
7