SoftBank Whiz Operational Manual page 84

10
Press the autonomous clean start/stop button ( ⇒ see "Autonomous Clean Start/Stop Button")
Autonomous cleaning begins.
n Remove the notification pager (⇒see "Notification Pager") from the machine and carry it with you.
n During autonomous cleaning, the LED light flashes orange twice in the direction the machine is turning.
(example: when the machine is going to turn right, the LED light on the right side will flash).
n During autonomous cleaning, the machine travels somewhat away from the edges of walls at a certain
distance so as not to scratch walls, etc. Use manual cleaning to clean the edges of walls (⇒see "Manual
Cleaning").
During autonomous cleaning, do not stand in front of the LIDAR sensor.
n
11
Check that all functions are operating properly
n Once autonomous cleaning completes, the machine returns to the Home Location Code, and notification
arrives on the notification pager.
The pager will notify you when cleaning is completed
Check "CLEANING COMPLETE", and tap "HOME"
Return to the main menu screen.
n After autonomous cleaning is completed, the status of the cleaning route/area is displayed.
: Taught cleaning route
: Cleaning is complete
: Cleaning is not complete
n Make sure to turn the machine off and charge the battery after use.
n For maintenance and storage after use, see "Maintenance and Safety".
79