Teaching A Cleaning Route Automatically - SoftBank Whiz Operational Manual

Teaching a Cleaning Route Automatically

You can create a cleaning route automatically by only training the perimeter of the cleaning area (within
specified limitations).
n Before teaching a cleaning route, check "Precautions when Teaching a Cleaning Route".
1
Pull the steering handle up as far as it will go, and lower it toward you
2
Move the machine to the Home Location Code where cleaning is to be carried out
( ⇒ see "Locations for Placing Home Location Codes")
3
Press the main power switch (I/O) to set it on (I)
A warning screen about escalators, steps or other moving platforms appears on the touch display (⇒see
"Touch Display").
66